DC-UPS voor condensatoren, primaire spanning: 24 V, secundaire spanning: 24 V, stroom: 20, energie: 8 kJ, afmetingen: 192x84x192 mm, gewicht: 2.2 kg
beschikbaarheid: 1-2 weken
C-TEC 2420-8
beschikbaarheid: 1-2 weken
C-TEC 2420-8
DC-UPS voor condensatoren, primaire spanning: 24 V, secundaire spanning: 24 V, stroom: 20, energie: 8 kJ, afmetingen: 192x84x192 mm, gewicht: 2.2 kg
Short descriptionThe DC UPS of the C-TEC 2420 series is equipped with integrated ultracapacitors for accumulating energy. During normal operation this capacitor is charged by an internal charger which is supplied by an external, regulated DC power supply. If the DC supply is interrupted, energy of the ultracapacitors is released in a regulated process (24 V DC ±2%). The load is supplied by the buffermodul until the capacitors are discharged. The buffering time depends on the state of charge of the capacitor and discharging current.
The DC-UPS shows the following features:
|
|---|
| Nominal input voltage |
24 V DC ± 12,5 % |
| Min. nominal input voltage for charging mode | |
| Max. nominal input current |
20 A |
| Nominal output voltage (mains operation) | 24 V |
| Nominal output voltage (buffer operation) |
23,2 V DC |
| Max. nominal output current |
20 A DC |
| Energy content |
8 kJ |
| Efficiency |
> 90 % |
| Buffer time | Depending on load |
| Degree of protection |
IP20 |
| Operating temperature |
-40 ... 60 °C |
| Storage temperature |
-40 ... 60 °C |
| Relative humidity | 95 % non-condensing |
| Max. altitude (without derating) | 2000 a. s. l. |
| Dimensions (H x W x D) |
192 mm x 84 mm x 192 mm |
| Weight |
approx. 2,2 kg |
| Fixation |
Snap-on mounting for DIN top hat rail or mounting bracket for mounting plate |
| Norms and Regulations |
EN 50178 / EN 60950 |
| UL approvals |
UL 508 C22.2 |
