DC-UPS pour batteries, primaire : 230 V, secondaire : 48 V, sortie: 11 A, dimensions: 241x101x244 mm, poids: 2.4 kg
Disponibilité : 1-2 semaines
AKKUTEC 4810
Disponibilité : 1-2 semaines
AKKUTEC 4810
DC-UPS pour batteries, primaire : 230 V, secondaire : 48 V, sortie: 11 A, dimensions: 241x101x244 mm, poids: 2.4 kg
Short Description
The battery backed up DC power supply in the AKKUTEC range uses the standby-parallel principle of operation and, in conjunction with a lead accumulator, ensures that the DC power supply is reliably maintained in the case of a mains power failure.
|
|---|
|
Rated Input Voltage 230 V version |
230V AC –15/+10% |
| Input Frequency | 47-63Hz |
| Max. Switch On Current | 65A / 3ms |
| Output Voltage |
39.6...52.8V DC 39.6.. 57.2V DC(during activated boost charging or temperature compensation) |
| Final Charging Voltage | 52.8V DC ±0.4% |
| Charging Characteristic | I/V DIN 41773-1 |
| Deep Discharge Protection and Load Shedding at | 39.6V DC ±0.4% |
| Nominal Output Current | 10 A DC |
| Constant Current Limiting | 1.05...1.1xIANom |
|
Battery Type |
Pb battery, maintenance-free
|
| Max. Power Loss ‘worst-case’ |
82 W |
|
Efficiency 230V Version: |
88.8%
|
| 400 V Version: Ua=26.4V DC, Ia=20A and Ue=400 V AC |
88.9 % |
| Earth Leakage Current | <3.5mA |
|
Fuse Protection, Primary 230 V version |
5 A slow (inside unit) |
| Max. Series Fuse Protection | 10 A slow |
|
Fuse Protection DC Output Circuit |
25 A |
| Fuse Protection Battery Load Circuit, Secondary | 25 A |
| Type of Connector, Primary ‘Netz’ (Mains) |
Combicon screw terminal 2.5mm2 |
| Type of Connector, Secondary ‘Ua’, ‘Batt’ |
Combicon screw terminal 4 mm2 |
| Type of Connector, Interface ‘IO-1...IO-3’ |
Combicon screw terminal 1.5mm2 |
| Type of Connector, Current Share Bus ‘CS’ | Spring loaded terminal 2.5mm2 |
| Fixation |
Mounting bracket for mounting plate |
| UL approvals | No |
