
| Specifications | |
| Network Interface | |
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) |
| LAN Mode | Dual Subnets or Network Redundancy |
| Connector ports | 2x 10/100BASE-T(X) RJ-45 |
| Serial Interface | |
| Connector | RJ45 RS-232/422/485 software selectable (-N models) or RJ45 Isolated RS-422/485 software selectable (-SiS models) |
| Port(s) | 16 |
| Baud rate | 1200~921,600 bps software selectable |
| Parity | None, Odd, Even, Mark, Space |
| Data bits | 5, 6, 7, 8 software selectable |
| Stop Bit | 1,2 software selectable |
| Flow Control | None, Xon/Xoff, RTS/CTS (RS-232 only) |
| Isolation | 2.5 KV (Sis versions only) |
| Power Characteristic | |
| Connector | DC version: 5.08mm 3-pin Lockable Terminal Block EU-US version: IEC 60320-1 C14 AC Power Inlet |
| Input Voltage | DC version: 24 - 48VDC; US-EU version: 100~240 VAC (EU or US Plug) |
| Input Current (@ 12VDC) | DC version: 0.54 A @24VDC; US-EU version: 0.21A@100VAC |
| Power Consumption | Approximately 21 W (Max) |
| Reverse Polarity Protection | Yes (DC version only) |
| Redundancy | No |
| Relay Output | Yes (1) |
| Approval | |
| EMC | FCC Part 15, Subpart B, Class B EN 55022, Class B, EN 61000-3-2, EN 61000-3-3, EN 55024 |
| Safety | EN60950-1:2006/ IEC60950-1 LVD |
| Shock Drop (Freefall) /Vibration |
IEC 60068-2-27 ISTA Test Procedure 2A /IEC 60068-2-64 |
| RoHS | Yes |
| MTBF | 5 years |
| Environment | |
| Operating | -20°C~70°C (-4°F~158°F) |
| Storage | -40°C~85°C (-40°F~185°F) |
| Humidity | 5~95%RH(Non-condensing) |
| Mechanical | |
| Housing | IP30 SPCC housing |
| Dimensions (W x H x D) | 436 mm x 43.5 mm x 200 mm |
| Installation | 19' Rack-Mount (Kit included) |
| Reset Button | Yes |
| Weight | 3,200g |
| Software | |
| Configuration | Atop Management Utility, Web UI, Telnet |
| Supported Protocol | IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, RFC2217, Security through IPsec host-to-host or host-to-side VPN with up to 37.9Mbps VPN throughput |
| VirtualCOM | Windows/Linux redirection software |
| Link Mode | |
| TCP Client | Dual destination supports raw-data or VirtualCOM |
| TCP Server | 4 Connections mode supports raw-data; VirtualCOM or reverse Telnet |
| UDP | Up to 4 Ranges IP |
Ordering code:
| Model Name | Part Number | Description |
| MB5916D-N-DC | 1P1MB591600001G | 16-Port Modbus Gateway, RJ45, RS232/422/485 DC |
| MB5916-SiS-DC | 1P1MB591600002G | 16-Port Modbus Gateway, RJ45, Isolated RS422/485 DC |
| MB5916-N-EU | 1P1MB591600013G | 16-Port Modbus Gateway, RJ45, RS232/422/485 EU Plug |
| MB5916-N-US | 1P1MB591600003G | 16-Port Modbus Gateway, RJ45, RS232/422/485 US Plug |
| MB5916-SiS-EU | 1P1MB591600014G | 16-Port Modbus Gateway, RJ45, Isol. RS422/485 EU Plug |
| MB5916-SiS-US | 1P1MB591600004G | 16-Port Modbus Gateway, RJ45, Isol. RS422/485 US Plug |
| SDK version | Contact HQ | SDK Programmable version |
Accesories:
| Model Name | P/N | Description |
| SDR-75-24 | 50500752240001G | 75W/3.2A DIN-Rail 24VDC power supply with universal 88~264VAC / 124~370VDC input |
| AD17-24C (US-Y) | 50500151240002G | Y-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, US plug |
| AD17-24D (EU-Y) | 50500151240012G | Y-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, EU plug |
| GDC-120 | 59906861G | 120mm copper woven grounding cable |
| CBL-RJ45(8P)-DB9(M)-90 | 50891781G | RJ45 to DB9 Male Cable, 90cm |
| CBL-RJ45(8P)-DB9(M)-200 | 50891951G | RJ45 to DB9 Male Cable, 200cm |
| CBL-RJ45(8P)-DB9(F)-90 | 50891791G | RJ45 to DB9 Female Cable, 90cm |
| CBL-RJ45(8P)-DB9(F)-90-C | 50891971G | RJ45 to DB9 Female Cross Over Cable, 90cm |
| CBL-RJ45(8)-DB9(F)-200-C | 50891961G | RJ45 to DB9 Female Cross Over Cable, 200cm |
| RMK-718-Black | 70100000000040G | Rack Mount Mounting-Kit, Black |
| Power Cable (US) | 50801041G | 6 feet Power Cable, US |
| Power Cable (EU) | 50801051G | 6 feet Power Cable, EU |
| Fuse | 50709441G | SFP Transceiver, 1250Mbps, 1310nmDFB, Single-mode, 30km, 3.3V, -40~85°C |