ZE-2AI-P is an I/O module with 2 analog inputs, and 1 Ethernet port, and supports PROFINET IO communication. The module has isolation between the inputs and low voltage circuits of 1,500 Vac. Configuration can be done via CODESYS softPLC software and TiA Portal/Simatic Step7 design environment.
| POWER SUPPLY | 10..40 Vdc / 19..28 Vac |
| POWER ABSORPTION | 1,5W @ 24Vdc, Max: 2W |
| ISOLATION | 1,5 kVac |
| PROTECTION DEGREE | IP20 |
| STATUS LED INDICATORS | Power supply / IP address Rx/Tx Profinet Tx Ethernet Link Ethernet Inputs/outputs status Fail |
| OPERATING TEMPERATURE | -25..+70°C |
| STORAGE TEMPERATURE | -30..+85°C |
| HUMIDITY | 30..90% non-condensing |
| DIMENSION | 17,5x102,5x111 mm |
| WEIGHT | about 110 g |
| HOUSING | PA6, black color |
| CONNECTIONS | Removable screw terminals for conductors up to 2.5 mm2 IDC10 rear connector for DIN rail 46277 RJ45 |
| MOUNTING | 35 mm DIN rail guide 46277 |
| CONFIGURATION | DIP Switch (default configuration) CODESYS softPLC software TiA Portal/Simatic Step7 Web Server |
| INTERFACE | Nr. 1 Ethernet 10/100 Mbps |
| SPEED | Up to 115.200 bps / 100 Mbps (TCP-IP) |
| SUPPORTED PROTOCOLS | Profinet IO |
| ANALOG INPUTS | Nr. 2 analog inputs |
| TYPE OF ANALOG INPUTS | 0..20 mA / 0..30 V max resolution 16 bit protection 40V / 25mA |
| STANDARD | CE |
